Then: (supplier told me it is optional, I have done it anyway)
Go to C:\ACTIA\Portal\chrome\multidiag\content\scripts
Open in a text editor file multidiag.js
Go to line “var showWarningPT1Window=true” and make this line like
“var showWarningPT1Window=false”
Done!
Note 1: it should appear each time when you diagnose that your VCI is old and blablabla, just click continue and it connects to the car
Note 2: it might not be 100% compatible with all cars as it is the old interface and does not do the multiplexing like the newer one. I tested on a few cars from 2000 to 2015 and for 300euro it is worth adding to collection!
Alero 1999-2002
Aveo I 2002-2011
Aveo II 2011-2018
Beretta 1987-1996
Blazer 199502005
Camaro 1998-2002
Captiva I 2006-2011
Captiva II 2011-2018
Corvette V 1998-2004
Cruze 2008-2015
Epica 2006-2011
Evanda 2005-2010
Kalos 2005-2008
Lacetti 2008-2011
Matiz 2004-2010
Nubira 2004-2010
Orlando 2011-2018
Rezzo 2005-2009
Spark II 2004-2010
Spark III 2010-2015
Spark IV 2015-2018
Tahoe 2000-2005
Trailblazer 2001-2009
Transport 1997-2005
Trax 2013-2018
Volt 2011-2014
Multi Diag 2018 Ford vehicle list:
Support both old (OBD I) and new (OBD II) Fords
B-Max 2012-2018
Bronco 1966-1996
C-Max I 2003-2007
C-Max I Facelift 2007-2010
C-Max II 2010-2015
C-Max III 2015-2018
Cougar 1998-2001
Courier V 1995-2002
Courier VI 2002-2013
Econovan 1983-2005
Ecosport I 2004-2012
Ecosport II 2013-2017
Edge 2015-2018
Escape 2000-2017
Escort III 1980-1990
Escort IV 1991-1995
Escort V 1995-2002
Everest III 2015-2018
Explorer I 1993-1997
Explorer II 1998-2002
Explorer III 2001-2010
Explorer IV 2010-2017
Fiesta II 1989-1996
Fiesta III 1995-2000
Fiesta IV 1999-2008
Fiesta VI PH1 2008-2013
Fiesta VI PH2 2013-2017
Fiesta VII 2017-2018
Focus I 1998-2005
Focus II 2004-2010
Focus III 2011-2015
Focus IV 2015-2018
Fusion 2002-2011
Galaxy I 1995-2006
Galaxy II 2006-2015
Galaxy III 2015-2018
GT II 2016-2018
KA I 1996-2009
KA I Streetica 2003-2005
KA II 2008-2016
KA III/FIGO 2016-2018
KUGA I 2008-2013
KUGA II 2013-2018
Maverick I 1993-1997
Maverick II 1997-2004
Mondeo I 1993-2000
Mondeo II 2000-2007
Mondeo III 2007-2015
Mondeo IV 2014-2018
Mustang VI 2015-2018
Orion II 1990-1994
P100 1982-1994
Probe 1993-1998
Puma 1997-2002
Ranger I 1998-2006
Ranger II 2006-2011
Ranger III 2011-2018
S-Max I 2006-2015
S-Max II 2015-2018
Scorpio I 1985-1994
Scorpio II 1994-1998
Sierra I 1982-1993
Sierra II 1991-1993
Tourneo Connect I 2002-2013
Tourneo Connect II 2013-2018
Tourneo Courier 2014-2018
Tourneo Custom 2012-2018
Transit I 1976-1991
Transit II 1992-2000
Transit III 2000-2006
Transit IV 2006-2012
Transit V 2013-2017
Transit Connect I 2002-2013
Transit Connect II 2013-2017
Transit Courier 2014-2017
Transit Custom 2012-2017
Windstar 1995-2003
Multi Diag J2534 2018 Chrysler car list:
300C I 2004-2011
300C II 2012-2018
300M 1999-2004
Crossfire 2003-2009
Delta III 2008-2016
Grand Voyager I 1994-2008
Grand Voyager II 2008-2018
Neom 1994-2004
PT Cruiser 2000-2009
Sebring 2007-2011
Stratus 1994-2001
Voyager II 1994-2001
Ypsilon II 2011-2007
2018.03 Multi Diag J2534 Passthru Jeep car list:
Cherokee II 1999-2001 Cherokee III 2001-2014 Cherokee IV 2014-2018 Compass I 2007-2017 Compass II 2017-2018 Grand Cherokee IV 2011-2018 Patriot 2007-2017 Renegade 2014-218 Wrangler III JK 2007-2018
2018 Multi Diag J2534 Passthru Saab car list:
9-3 I 1998-2003 9-3 II 2002-2012 9-5 I 1997-2010 9-5 II 2010-2012 900 I 1981-1993 900 II 1993-1998 9000 1996-1998
Note: Access Multi Diag 2018 has a better universal vehicle coverage, compared with I-2016 Multidiag. But you cannot update version 2016 directly to 2018 for the hardware is different. The 2016 interface will be damaged if you try 2018 sw with it.
Hello, I have an actia a couple of years ago and I have it installed on a desktop computer, there would be a problem in installing the update. my scanner is french
Hello, there is no problem in installing the update on the computer, you would have to pass the serial number of the computer to see if it is compatible or you have to reprogram the scanner.
What with cm interface works?
It works with the actia multi-diag interface
Hello you m install the program I have the interface of Peugeot citroen is compatible ??
Hello, it is not compatible with the Peugeot scanner. regards
Tell me how we do to perform the update. You send me the program and install it with Teamviewer?
The multi-diag sw cannot be updated yourself.
You’d better get a new vci with updated firmware for the new software.
My problem is that it is not a notebook. It is a desktop PC installed in a mobile cabinet …
We can help install the program remotely, if it does not work, just bring the scanner to change the serial number.
I would like to know what would be the steps to update Multidiag. I have it installed on a PC running Windows XP. I have the pregrama and the original VCI (Series N ° 120201). I’m from Rosario.
Hello, the multi-diag sw cannot be updated yourself.
You’d better get a new vci with updated firmware for the new software.
It serves for the diag box lexia.
Hello, it only works for multidiag interfaces.
Good day, we are going to make the purchase of the update and we communicate via telephone. Thanks greetings
Hello good day, please remember please choose the option “agree delivery with the buyer”. If you have any doubt consult me before.
It seems to me that it is better to send the interface first to buy time, give me the address and transport where I send the interface and where I sent the payment (along with the interface or some kind of deposit). Greetings. Oscar
Send the scanner refers to the interface alone or also the notebook where it is installed?
To the interface alone to be able to change the serial number. The installation can be done remotely.
Is the installer software with update included? I have the original Multidiag program. The original VCI of Actia with N ° Series 120201. I have it installed in a notebook with W98 and I would like to install it in another with W7. My fear is to modify the VCI and then not work with the new software and not with the original.
Hello good day, to work with version 2018 it is necessary to change the serial number, we guarantee that it will work perfect with version 2018. Any other question we are at your disposal.
Is the installer software with update included? I have the original VCI of Actia with N ° Series 120201. I have it installed in a notebook with W98 and I would like to install it in another with W7.
Hello good afternoon, come back to check on Monday that I confirm with the technician if that serial number works.
How much do you do that job with original Multidiag 2018
$ 2000
I pass the number of the interface sn: 076957 02/13 you can tell me if it works without reproming
This serial number is not compatible with version 2018, you should send us the interface to change the serial number.
I have a clone interface used for this program
Hello good day, if it works with clone interfaces, depending on the serial number it may be that you need to reprogram the interface.
Has Fiat Bull, Palio 2018, Corsica and Renault Kwid?
Hello, to see all the models included in the program you can see it from the actia website.
Hello! Do you have models 2018?
Hello, if you have models 2018.
Hello, I have dÃagbox, this program that you sell is compatible for the interface that I have?Thank you
Hello, it is only compatible with the own scanner of actia.
With what interface it works … it has to be actia … I have an elm 327 can be compatible thanks
Hello good afternoon, it is not compatible, it only works with interfaces of the actia brand.
Installation instructions - WORKS ONLY ON 32BIT (TESTED ON WINDOWS 7 SP1 X32)
INTERNET MUST BE OFF
1. run ACTIA_NET_BLOCK.bat (Run as administrator if possible)
2. run Activation MAJ MD 033918/keyUpdate (Run as administrator if possible)
2. Install Actia Multidiag Standard Profil (if the case, use S/N: 033918 instead of xxxxxxx)
RESTART COMPUTER after installation finished
3. Go to C:\ACTIA\Portal
4. Remove Wget.exe
5. Go to control panel -> uninstall or change a program -> there are 3 drivers made by ACTIA. Remove all 3 drivers.
6. Install I+ME-Actia-PassThru-XS2G-Driverpack-2.8.1.14.exe
Then: (supplier told me it is optional, I have done it anyway)
1. Go to C:\ACTIA\Portal\chrome\multidiag\content\scripts
2. Open in a text editor file multidiag.js
3. Go to line "var showWarningPT1Window=true" and make this line like
3. "var showWarningPT1Window=false"
Done
Note: it should appear each time when you diagnose that your VCI is old and blablabla, just click continue and it connects to the car
Note2: My supplier told me that it might not be 100% compatible with all cars as it is the old interface and does not do the multiplexing like the newer one. I tested on a few cars from 2000 to 2015 and for 300euro it is worth adding to collection!
Latest version ACTIA clone Multi-Diag Access J2534 Pass-Thru OBD2 device V2016.01 software has released in obdii365.com. The new I-2016 Multi-diag software does not require activation.
Software activation Notice: Must disconnect network when installing the software!!!
How to Install V2016.1 Multi-diag Access J2534 software?
Step 1: Install Multidiag J2534 Setup
Open software CD
Copy SN (Serial Number) key pad to desktop
Run setup
Click on Next
Accept the license agreement
Click Next
Multi-diag will require you to enter VCI serial number, open key pad and paste SN here-033918
click on Next
Select setup language
Select setup type Profile ACTIA (Standard)
click on Next
Installing MSVisual C++, setup, driver in progress
This will generate Multi-diag shortcut on desktop
Select Yes. I want to restart my computer now. Click on Finish
Step 2: Install Multi-diag J2534 Pass thru USB driver
Connect Multi-diag access J2534 pass-thru with computer
Select Install the software automatically (Recommended)
Click on Next
Searching Pass Thru USB driver
Found new hardware wizard. click on Finish
Go to My computer->Manager->Device Manager->I+ME ACTIA XS Device->Pass Thru+xs USB driver TO MAKE SURE WELL CONNECTION IS BUILT
Step 3: Communication interface update
Open Multi-diag software on desktop
Select Multi-diag
Select model year and module, i.e VW->PASSAT VI (2005-2011) Engine system-VAG diagnostics
Communication interface update
Accept the warning by click tick icon
The vehicle communication card cannot be reached,confirm to try again, Cancel to ignore, click tick icon
Check Pass Thru+xs USB driver then if it pops again, click No icon
If multi-diag warns AWFInterpreter Security ERROR, click on Tick button
Communication interface update.
Error while downloading the VCI. Check that it is connected to the tool and to the vehicle,click tick icon
Go back to software vehicle selection menu
click on Car icon, turn on the key
Step 4: Install Pass-thru driver Only when you install Pass-thru driver can you test the car
Select install from a list or specific location (Advanced),click on Next
Save driver to C:/ACTIA/Drivers VCI/PT1G
click on Next
USB passthru driver installation complete. Click on Finish
Check driver installed and multi-diag J2534 diagnostic scanner interface connected with both computer and vehicle by selecting Manager->Device Manager->PC–******->ACTIA USB Devices->USB PassThru Driver
Detect vehicle VIN and vehicle protocol, now you can start test
When i install I-2014 (2014.01V) Multi-diag Access J2534 Pass-thru diagnostic software, after activate the software it gave me error
"Telechargement du composant d'activation
Connectez votre station de diagnostic a internet
1-Connectez votre station (le composant d'activation s'installe automatiquement)
2-Cliquez sur suivant"
activation component download
Connect your diagnostic station has internet
1-Connect your station (activation component automatically installs)
2-Click Next
Solution
Software installation faied, so fail to activate Multidiag j2534 software. The error may cause by the computer. Please change other windows xp laptop. If still do not work,change another laptop.